Драйвер Leadshine M556C, 5.6А
| Ток | 5.6 А |
|---|---|
| Напряжение | 36 V |
| Вес | 0.4 кг |
Внимание: все переключатели на драйвере настраиваются только тогда когда драйвер полностью отсоединен от питания.
M556C является полностью цифровым драйвером со встроенным 32-битным DSP алгоритмом. Снижение нагрева и шума, подавление резонанса и повышение момента осуществляются, благодаря превосходным свойствам и оптимальному дизайну.
* Инструкцию можно найти в разделе "СКАЧАТЬ"
| Ток | 5.6А |
| Входное напряжение | 20-50VDC (рекомендуется 36VDC или 48VDC) |
| Частота импульсов | 200кГц |
| Деление | 1/512 |
| Управление | STEP/DIR |
| Охлаждение | воздушное |
| Вес | 0.4кг |
Фото нового драйвера M556C от 18-го Марта 2021.
The M556C is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, M556C can drive a stepper motor at much lower noise,
lower heating, and smoother movement. Its unique features make M556C an ideal choice for high requirement applications.
Features
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
- 15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
- Soft-start with no “jump” when powered on
- Input voltage 20-50VDC
- 8 selectable peak current including 1.8A,2.1A, 2.7A, 3.2A, 3.8A, 4.3A, 4.9A, 5.6A
- Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
- Automatic idle-current reduction
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR mode
- Over-voltage and over-current protections
Applications
Suitable for a wide range of stepper motors, size from NEMA23 to 24. It can be used in various kinds of machines, such as X-Y tables, engraving machines, labeling machines, laser cutters, pick-place devices, and so on. Particularly adapt to the applications with low noise, low heating, high speed and high precision.